Applications: On-board vehicle equipment, Test bench equipment, Laboratory and research
Industries: Engine and Vehicle
Description: The FN2570 load cell has been developed for pedal force testing. It attaches easily on all types of pedals and test rigs for endurance and fatigue tests, especially where size is an important factor. Strain is measured with high precision independent of the point of application of force. A strain relief spring strengthens the cable output. With many years of experience as a designer and manufacturer of sensors, Measurement Specialties, Inc. often works with customers to design or customize sensors for specific uses and testing environments. Measurement Specialties, Inc. have many years of experience as a designer and manufacturer of sensing solutions to the automotive industry and can supply standard or custom sensors for specific uses and testing environments. Consult Measurement Specialties, Inc. Engineering Department for a custom solution to your application.
Features:
Compression measurements
Accuracy regardless of force application point
Extra-flat and rugged design
Easy installation
典型應用: 汽車測試，測試臺，實驗室研究
行業: 發動機和機動車輛
產品描述: FN2570力傳感器專為測試腳踏板力而設計，尤其是對傳感器尺寸要求嚴格的應用場合。傳感器方便與所有類型的腳踏板和測試裝置連接，用于持久性和疲勞測試。應力測量準確，不受測試點位置的影響。在傳感器和電纜連接處帶有彈簧保護。作為擁有多年經驗的傳感器設計和制造商，MEAS常常與客戶合作，按要求定制適合特殊用途和測試環境的傳感器。同時，我們也根據客戶需要提供成套系統。配套元件（傳感器，電源，放大器和數顯系統）配置統一，經過校正，可供客戶立即使用。
特點:
壓力測量
測量精度與測試點位置無關
超扁平堅固結構設計
安裝方便
FN2570力傳感器更多技術參數及規格書下載請瀏覽：http://www.sensorway.cn/sensors/601.html
北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。
